Home > Blue Screen > Spontaneous BSOD On Fresh Install Win7 Ult. Need Help Diagnosing.

Spontaneous BSOD On Fresh Install Win7 Ult. Need Help Diagnosing.


The interval between BSOD seems to... 0 0 10/11/15--09:58: BSOD Win7 Ultimate X64 with multiple dumps Contact us about this article Hi, My parents in law havan Aspire X1700. Now I might be wrong here as I've never worked w/overclocking a Phenom x6. It could also be overheating, take the sides off of the case and point a desk fan, box fan, any kind of fan really - bigger is better, directly into the If Parted Magic does have a problem then we can use another linux distro that boots with SecureBoot and UEFI enabled. http://lacosteradigital.com/blue-screen/bsod-on-a-fresh-install-win7-pro-64-bit.html

You can install or repair the component on the local computer. Register now! Its purpose is to detect when the GPU stops responding, disable it and reinitialize it without the need to exit windows or reboot. Also, this is a good time to make sure that your CPU cooler is not chocked with dust - if so, clean it up!B) Disconnect any HDD's that you don't need

Bsod Different Message Every Time

Have you monitored it under load? but for some strange reason I'm still getting the same readings on PC Probe II.Not quite sure what to think about that - it's been quite a while since I've fiddled more hot questions question feed about us tour help blog chat data legal privacy policy work here advertising info mobile contact us feedback Technology Life / Arts Culture / Recreation Science This problem might be caused by a thermal issue.

When I restarted the computer the error message details read thus: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7600. Locale ID: 1033 Additional information about the problem: BCCode: 116 BCP1: More often than not, the problem is either a bad memory stick or good memory sticks which just don't work together. If there was a bsod error would give more information to go by. Windows 10 Blue Screen Of Death Please note that I posited that it could be a hardware issue prior to the OP discovering that there were indeed BSODs involved.

Standing Stone Games and the Standing Stone Games logo are trademarks or registered trademarks of Standing Stone Games LLC. . This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA). You might want to try typing "blue screen" into the advanced search box of this forum. "It's a CHARACTER, not a TOON. http://superuser.com/questions/129125/how-to-diagnose-a-spontaneous-reboot All was fine but PSU was failing under load conditions.

Google query: On Sat 02/07/2016 10:47:16 AM GMT your computer crashed crash dump file: C:\Windows\Minidump\070216-44881-01.dmp This was probably caused by the following module: (nt+0x32D9E7) Bugcheck code: 0x124 (0x0, 0xFFFFFFFF86FFB024, 0x0, 0x0) Blue Screen Of Death Fix This is likely to be caused by a hardware problem problem. Check and make sure that automatically restart on system failure is disabled. share|improve this answer answered Apr 9 '10 at 8:52 Zsub 4411513 add a comment| up vote 4 down vote I won't repeat the guides others have written - you should start

Blue Screen Error Windows 10

This problem might be caused by a thermal issue. Last edited by Idiotvillage; Mar 25 2011 at 04:07 AM. Bsod Different Message Every Time But after a game required it, I turned it back on. Bsod Error Codes If your computer has displayed a blue (or black) screen of death, suddenly rebooted or shut down then this program will help you find the root cause and possibly a solution.

Now, with the new PSU, I have to conclude that the old PSU was not the problem.So, the question is: Is it the eVGA GT620 video card? http://lacosteradigital.com/blue-screen/bluescreen-after-fresh-install.html SushihunterAsus P5K Premium WiFi - BIOS 1101Intel Core 2 Quad Q6600 CPU 2.40 GHz* Newly ReplacedOCZ DDR2 RAM - PC2-6400 4GBs + G.Skill DDR2 RAM - PC264004GBs Total 8GBsEVGA Nvidia GT They told me they could use the computer for a couple minutes before the BSOD appears. Username Forum Password I've forgotten my password Remember me This is not recommended for shared computers Sign in anonymously Don't add me to the active users list Privacy Policy


If errors still occur I'd have to say that one of your RAM sticks is most likely suspect.These errors all seem unrelated except possibly for the DirectX and video driver errors. In case of a kernel error, many computers do not show a blue screen unless they are configured for this. Bad results on memtest always mean something is wrong. http://lacosteradigital.com/blue-screen/fresh-install-win7-32-bit-blue-screen.html I am pretty sure that you would need to lower game video resolutions and settings when testing, but I'm sure that you'll live through it!

I will try lowering the CPU voltage when I get back to home from work.This is really starting to get to me, I'd have a ton of work to do on Windows 10 Stop Code QUESTION: in your last note you said that you had 2x2Gb modules - did you mean 2x4? I dont know which program or service is the cause.I reinstalled windows but the problem persists.

Please try the request again.

The aurora-r2 comes with a 525W power supply. A third party driver was identified as the probable root cause of this system error. Note that it's not always possible to state with certainty whether a reported driver is responsible for crashing your system or that the root cause is in another module. Chkdsk Paul TomatoSep 18, 2011, 8:11 AM Hey eggsodus,I've got a few questions for you:1) What's you power supply, and how old is it?

Also turn off EAX just to be safe. It is suggested you look for an update for the following driver: hal.sys . After putting all four back in, no errors reappeared. have a peek here Since I am not sure if they are related in any way, I've included a link to that thread as well: http://forums.lotro.com/showthread.p...launching-game Thank you for your help!

EVGA replaced that one with a new one. I have in fact overclocked nothing (even though I have the typical components for it). Site Changelog Community Forum Software by IP.Board Sign In Use Facebook Use Twitter Need an account? If you still get an error, then any processor overclock (if you use one) is most likely not an issue, so the next step I'd take is:D) Run w/one ram module

This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA). Could be HDD related, since your RAM past. TDR (Timeout Detection and Recovery) is a windows vista and windows 7 feature. nikorrSep 19, 2011, 3:55 PM I moved on win7 about 6mo.

If it finds an error, then you're nearly certain to have a bad stick of RAM. Join them; it only takes a minute: Sign up Here's how it works: Anybody can ask a question Anybody can answer The best answers are voted up and rise to the Google query: On Mon 04/07/2016 12:35:17 PM GMT your computer crashed crash dump file: C:\Windows\memory.dmp This was probably caused by the following module: (hal!HalBugCheckSystem+0xAB) Bugcheck code: 0x124 (0x0, 0xFFFFFFFF8697001C, 0xFFFFFFFFF2000040, 0x800) This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).

Generated Wed, 11 Jan 2017 07:50:26 GMT by s_wx1077 (squid/3.5.23) We have detected that cookies are not enabled on your browser. Great replacement psu...http://www.evga.com/Produ...aspx?pn=220-G2-0650-Y1 #2 Sushihunter New Member Total Posts : 92 Reward points : 0 Joined: 2014/03/31 18:22:03 Status: offline Ribbons : 0 Re: Help - Diagnosing Frequent Crashes BSoD - the bios will typically shut down or reboot if it senses a fan failure, typically a failure is nothing more than the fan not spinning at a minimum fan speed. If it works then you know you've been overheating somewhere along the way.

It seems like quite a generic error message This thread describes a person having a similar problem http://www.tomshardware.com/forum/72...n-1033-bccode# I would follow the suggested advice and try updating video drivers or rolling I (actually my girlfriend) was getting different BSOD messages all the time - sometimes it was memory management, other times some ATI driver file. Back to top « Prev Page 5 of 5 3 4 5 Back to Windows 7 2 user(s) are reading this topic 0 members, 2 guests, 0 anonymous users Reply to Also, the spontaneous re-boots don't bode well, but I saved the important part for last.Your CPU power is exceeding the SPECS of your motherboard.

It also offers a range of additional features such as remote analysis on remote directories and remote computers on the network. I think so from what you said but if not you could have a memory mismatch - some modules require different voltages...Bedtime - vry late - good luck! I suggest you leave it running overnight or longer and see if it reports any errors. The following information was included with the event: Service started [charsig=http://lotrosigs.level3.turbine.com/04208000000028f85/01008/signature.png]undefined[/charsig] [Color=green] Amyranth ~ Amyrillis ~ Amythest ~ Amygdala [/color] ^_^ [color=gold][url=http://my.lotro.com/kinship-elendilmir-avaro_naeth]Avaro Naeth[/url] ~ Elendilmir's home for elderly altaholics[/color] Reply With