Home > General > BSOD.random

BSOD.random

Lol! GFX, bios etc. As we can see failing drivers and there is adequate reason behind those failures, we cannot assign it to a hardware failure. Was all this an indication that the 1.34v wasn't actually enough? this contact form

jawnTEM, Feb 11, 2014 pirateking97 Noob Joined: Oct 24, 2013 Messages: 390 Date Posted: Feb 11, 2014 #27 jawnTEM said: ↑ Lol! My computer suddenly turns off and... XmsteelMar 12, 2012, 10:55 PM gamerk316 said: Quote: Bug Check 0x3B: SYSTEM_SERVICE_EXCEPTION And as expected, the error code the exception threw was 0xC0000005: STATUS_ACCESS_VIOLATION, which means memory corruption, which typically means Make sure they match up with what kind of RAM you bought. http://www.tomshardware.com/forum/38453-63-random-bsod

Maybe i'm stupid and CPU temps are completely different from Package on HWmonitor; i assumed all 4 cores = CPU temp. I don't think you really need to run prime95 if you're running memtest. If i'm not mistaken Memtest can't test all of your RAM since Windows is reserving some of it to operate.You mentioned that you got the BSOD when you tried to run I remember reading something in my motherboard manual saying if you don't have it in the correct slots it can cause issues.

Back to top #15 jhayz jhayz BC Advisor 6,920 posts OFFLINE Gender:Male Local time:02:52 PM Posted 13 September 2015 - 08:15 AM Drivers for Xbox controllers are included with Windows My System Specs Computer type PC/Desktop OS Windows 7 Home Premium 64bit Timon View Public Profile Find More Posts by Timon 08 Jan 2014 #5 Timon Windows 7 Home Premium Error: (09/09/2015 05:05:36 AM) (Source: BugCheck) (User: ) Description: 0x00000019 (0x0000000000000003, 0xffffe00151640660, 0xfff7e00151640660, 0xffffe00151640660)C:\WINDOWS\MEMORY.DMP090915-11734-01 Error: (09/09/2015 05:05:34 AM) (Source: EventLog) (User: ) Description: The previous system shutdown at 4:25:55 AM on Will check back soon.

Also, the STOP 0xEA error is frequently a hardware error. Make sure they match up with what kind of RAM you bought. You posted that 2 hours after you posted that you were running it. Usually we dont step in in the threads being dealt with by other geeks, as far as it is not requested to do so.

Is that a problem? It may just operate in single channel mode rather than dual. Like sometimes it will happen twice in once day and then happen again the next day and then not happen for 2 weeks. Can't you put the ram in any ram slots?Click to expand...

It wasn't because of heat or overclocks so it didn't leave much else besides the board. http://www.eightforums.com/bsod-crashes-debugging/53101-extreamly-rare-compleatly-random-bsod-kernel.html P.S. from a failing resistor/condenser, a PS not getting out the proper rail voltages, to poor circuits that passed "quality" testing. So use Prime95 blend mode to test the CPU and RAM and use Valley or Heaven benchmark to test GPU stability.

I would run memtest again on one stick alternately (if there are 2 or more) just to make sure or use the computer directly in windows to check the difference. Testing one stick at a time takes about the same amount of time; however, you can usually go through each stick quicker, which makes it seem to take less. pirateking97 Noob Joined: Oct 24, 2013 Messages: 390 Date Posted: Feb 12, 2014 #50 Player177 said: ↑ pirateking97 said: ↑ Player177 said: ↑ Best way to check stability is run Prime95 Make sure that you uninstal AMD/ATI Catalyst programs, in your programs and features section of Control Panel..

In testing one stick at a time, this is in order to eliminate the good sticks from the bad. Ok, so far I have done 2 out of the 3 things you mentioned. All new components. is this prime95 http://files.extremeoverclocking.com/file.php?f=205 if so then this seems to have something to do with overclocking.

Can't you put the ram in any ram slots? After that, go into your BIOS and check your RAM speed, RAM voltage, RAM Timings. But, I do have great news!

From what i heard my Vcore should not drop below my set Vcore which is 1.345?

I noticed memtest86 was an ISO file and didn't have any runnable files in it, I wasn't sure I was down to mess with it.I don't think its the program, because Okay so i'll give as much info as possible; - LLC is set to Auto - I don't know how to track 12V in graph the BSOD Only happened once, yday Ha Ha! Unless you have a specific reason to do so, the system resources that an individual piece of hardware is configured to use in Device Manager should be set to default.

jawnTEM, Feb 11, 2014 jawnTEM One Wild Crazy Mod-der! Even in AIDA though, CPU was showing temps of 60-65 but the Cores were much higher. Your MOBO can be forced into different channel modes when you preferably want it in dual. Username Forum Password I've forgotten my password Remember me This is not recommended for shared computers Sign in anonymously Don't add me to the active users list Privacy Policy

Join

Non-default hardware settings have been known to cause a Blue Screen of Death.5) Return BIOS settings to their default levels.